One of the reasons I liked Dish Network (to the extent anybody can like a purely commercial entertainment utility) was that their satellite receivers included an over-the-air tuner. It nicely folded your over-the-air (OTA) stations in with others in the system’s channel guide. Here’s how it looked:
Well, the week before last I discovered that our Dish receiver was having trouble seeing and using its broadband connection — and, for that matter, the phone line as well. That receiver was this one here…
… a ViP 622. Vintage 2006. Top of Dish’s line at the time. Note the round jack on the far left of the back side. That’s where your outside (or inside) over-the-air antenna plugged in. We’ll be revisiting the subject shortly.
So Dish sent a guy out. He replaced the ViP 622 with Dish’s latest (or so he said): a ViP 722. I looked it up on the Web and ran across “DISH Network’s forthcoming DVRs get detailed: hints of Sling all over“, by Darren Murph, posted May 18th 2008. Among other things it said, “The forthcoming ViP 722 will be the first HD DVR from the outfit with loads of Sling technology built in — not too shocking considering the recent acquisition. Additionally, the box is said to feature an all new interface and the ability to browse to (select) websites, double as a SlingCatcher and even handle Clip & Sling duties.”
So here it was, July 2009, and I had a ViP 722 hooked up to my nice Sony flat screen, and … no hint of anything remotely suggestive of a Sling feature. When I asked the Dish guy about it, he didn’t have a clue. Sling? What’s that? Didn’t matter anyway, because the thing couldn’t use our broadband. The guy thought it might be my firewall, but I don’t have one of those. Just a straight Net connection, through a router and a switch in a wiring closet that works fine for every other Net-aware device hooked up to it. We tested the receiver’s connection with a laptop: 18Mb down, 4Mb up. No problems. The receiver gets an IP address from the router (and can display it), and lights blink by the ethernet jack. But… it doesn’t communicate. The Dish guy said the broadband was only used for pay-per-view, and we don’t care about that, it doesn’t much matter. But we do care about customer support. Dish has buttons and menu choices for that, but—get this—has to dial out on a phone line to get the information you want. I had thought this was just a retro feature of the old ViP 622, but when I called Dish they said no, it’s still a feature of ALL Dish receivers.
It’s 2009, and these things are still dialing out. On a land line. Amazing.
So a couple days ago my wife called me from the house (I’m back in Boston) and said that the ViP 722 was dead. Tot. Mort. We tried re-setting it, unplugging and plugging it back in. Nothing. Then yesterday Dish came out to fix the thing, found was indeed croaked, and put in a new one: a ViP 722k, Dish’s “advanced, state-of-the-art” reciever of the moment.
Well, it may be advanced in lots of ways, but it’s retarded in one that royally pisses me off: no over-the-air receiver. That jack in the back I pointed out above? Not there. So, no longer can I plug in my roof antenna to watch over-the-air TV. To do that I’ll have to bypass the receiver and plug the antenna cable straight into the TV. (That has never worked either, because Sony makes the channel-tuning impossible to understand, much less operate. On that TV, switching between satellite and anything else, such as the DVD, is a freaking ordeal.) Oh, and I won’t be able to record over-the-air programs, either. Unless I get a second DVR that’s not Dish’s.
Okay, so I just did some looking around, and found through this video that the ViP 722K has an optional “MT2 OTA module” that gets you over-the-air TV on the ViP 722k. Here’s some more confusing shit about it. Here’s more from Dishuser.org. Here’s the product brochure (pdf). Digging in, I see it’s two ATSC (digital TV) tuners in one, with two antenna inputs, and it goes in a drawer in the back of the set. It costs $30. I don’t think the Dish installer even knew about it. He told me that the feature had been eliminated on the 722K, and that I was SOL.
Bonus bummer: The VIP 722k also features a much more complicated remote control. This reduces another long-standing advantage of Dish: remote controls so simple to use that you could operate them in the dark. Bye to that too.
So. Why did Dish subtract value like that? I can think of only two reasons. One is that approximately nobody still watches over-the-air TV. (This is true. I’m one of the very few exceptions. Color me retro.) The other is that Dish charges $5.99/month for local channels. They did that before, but now they can force the purchase. “Yes, we blew off your antenna, but now you can get the same channels over satellite for six bucks a month.” Except for us it’s not the same channels. We live in Santa Barbara, but can’t get the local over-the-air channels. Instead we watch San Diego’s. Dish doesn’t offer us those, at any price.
The final irony is that the ViP 722k can’t use our broadband or our phone line either. Nobody ever figured out that problem. That means this whole adventure was for worse than naught. We’d have been better off if with our old ViP 622. There was nothing wrong with it that isn’t still wrong with its replacements.
Later my wife shared a conversation she had with a couple other people in town who had gone through similar craziness at their homes. “What happened to TV?” one of them said. “It’s gotten so freaking complicated. I just hate it.”
What’s happening is a dying industry milking its customers. That much is clear. The rest is all snow.
Leave a Reply