Types of SS305 Fittings

Valve Fittings are the most common type of industrial Valve Fitting. They are used to replace the original valve stem with a new one.

Fitting Types: Valve, Valve Spring, Spring Spring Fitter, Springs, Fits, Hose, Tube, Tubing, Pipe, Cylinder, Piston, and Valve Cover.

Vacuum Valve: A valve that is used to control the flow of water in a plumbing system. It can be installed on any type of pipe or fitting so you have complete control over how much liquid goes into your system without having to go outside and turn off all the faucets. There are two types of valves out there: one has a spring loaded mechanism which closes when pressure exceeds certain levels (usually 50 psi) while another uses an adjustable piston valve. The difference between these two kinds of valve is that with the adjustable piston, it takes more force to close than it does for the spring valve.This gives users greater control, but also means they will need to adjust their pressure once in awhile. When the valve is set at 70 pounds and you go over that, it can be quite difficult if not impossible for someone who isn’t used to using this type of valve.
Picture of SS304 316 Camlock Type B
With that being said, let’s take a look at the two different types.

Spring-Loaded Valves: The spring-loaded valves are the most common type. They are used in a variety of applications, but are most commonly found in the marine industry.

Leave a Comment

Log in